Thermoplastic Ceramicizable, halogen-free, low-smoke, Fire-resistant Polyolefin
This a new type of Ceramicizable polyolefin material, which is used for producing
fire-resisting cable.
Good flame retardant and fire resistance. Excellent heat insulation performance. The Fire resistant cable made of Ceramicizable polyolefin particles could meet the
following standard. GB 19666.6 A Grade, IEC60331, BS 6387 C W Z Grade, BS 8491
Thermoplastic Ceramicizable, halogen-free, low-smoke, Fire-resistant Polyolefin
Description
This a new type of Ceramicizable polyolefin material, which is used for producing fire-resisting cable.
Features
Good flame retardant and fire resistance. Excellent heat insulation performance. The Fire resistant cable made of Ceramicizable polyolefin particles could meet the following standard. GB 19666.6 A Grade, IEC60331, BS 6387 C W Z Grade, BS 8491
High strength
After flame ablation, the fracture strength of the hard ceramic shell can reach about 3 MPa. High temperature and low temperature resistance: before flame ablation, -45~90℃ under normal use; after flame ablation, the high temperature resistance of inorganic ceramics can reach 1500℃.
Good Process performance
3 x 120 sqm fire resistant cable extrusion speed could get up to 18 meters/min
Excellent safety and environmental performance
Halogen-free, Low Smoke,accord with ROSH and REACH
Economy
It can be directly used as cable insulation layer, and can serve as a fire protection layer, sheath layer, oxygen insulation layer.
Application
Low and medium voltage fire resistant cables, power and control fire resistant cables, fire resistant cables for mining, fire resistant cables for ships, fire resistant cables for oil fields and offshore platforms, instrument fire resistant cable, signal and data fire resistant cable, coaxial fire resistant cable, fire resistant fiber optic cable. Specification Sheet


Process guidance
The screw type: Single-thread low-smoke halogen-free screw rod Recommended compression ratio: ≤1:1.5 It is recommended to use the extrusion type or semi-extrusion type mold; The fixed diameter should be 1-2mm shorter than the normal one, and the die core should be 1-2 filaments back during extrusion It is recommended to dry before use, which should be 40-60℃ 1-3h. It is strictly prohibited to dry for too long time and at too high temperature.

Package: 25 KG/Bag
Transport:
keep away from the sunshine, rain and soaking during transport, as well as handle gently during carrying
Storage: clean, dry and ventilated warehouses, keep away from the sunshine.
Shelf life: 12 month (under above storage condition)
Contact: JAMES
Phone: +86 189 9636 4670
E-mail: JAMES@RCICABLE.COM
Whatsapp:+86 189 9636 4670
Add: Xintiandi Building 1-107, Linan, Hangzhou, Zhejiang, China.